How to Fix Amazon Smart Plug Blinking Red Issue?

How to Fix Amazon Smart Plug Blinking Red Issue? – The Amazon Smart Plug faces technical malfunction mainly due to poor internet connectivity. Or there could be many more other reasons that trigger such issues. When we talk about smart plugs, the most common problem that the users encounter is the blinking red issue. If you can relate to this situation and looking for reliable steps to wipe out this issue, then you have reached the right place. This wiki-tech will teach you How to Fix Amazon Smart Plug Blinking Red Issue.

With the quest to have fully modernized homes, Smart Plugs have gained huge popularity. Their proficiency to allow users to take control over different activities and devices are the major reason behind their popularity. But, like any other device, these gadgets also face technical malfunctions such as red light issues. It is one of the most common technicalities that users face with Smart Plugs. If you are facing the same issue and wanted to know How to Fix Amazon Smart Plug Blinking Red Issue, then read the literature mentioned down below. By the end of this wiki-tech, you will be well-versed with the tips & tricks to wipe out this issue.

Reasons Behind Amazon Smart Plug Blinking Red Issue

Usually, connectivity errors are the major culprits behind this issue. In such a case, a router and device reset is recommenced. But if even after the reset, the issue persists, then either the Smart Plug is faulty, your network settings are outdated/incorrect or you have a network outage.  The technical defaults with Smart Plugs that taken a toll in recent times. Understanding the criticality of the issue, we have listed some key reasons behind this issue. So, before we proceed further to How to Fix Amazon Smart Plug Blinking Red Issue, let us first have a look at the reasons behind this problem:

1. Network errors.
2. Power outage.
3. Incorrect network settings.
4. Network outage.
5. Outdated network settings.
6. Connectivity error.

These are some of the major culprits that are responsible for this technical defect. Whatever the reason is, we have the exact resolution for you.

How to Fix Amazon Smart Plug Blinking Red Issue

This part of this wiki-tech will discuss some quick fixes to wipe out the Amazon Smart Plug Blinking Red Issue. All you have to do is follow the below-mentioned instructions in the exact same order as mentioned and wipe out this issue from its roots:

Common Troubleshooting Steps to Fix Amazon Smart Plug Blinking Red Issue

How to Fix Amazon Smart Plug Blinking Red Issue? If this is the question, then below are the ways to fix this issue. This issue generally indicates that there is trouble with your internet connectivity. Therefore, you need to try out these steps:

1. Begin the process by checking the internet connectivity. Make sure it is working fine and your router is getting proper signals. Also, ensure that your devices are connected to the same network.
2. Ensure the distance of almost 6 feet between the Smart Plug and the router.
3. Check the updates of hardware and software. Download and install the updates (if available).
4. At last, reset the Smart Plug and router as well.

Power Cycle Smart Plug

The simple answer to How to Fix Amazon Smart Plug Blinking Red Issue is to power cycle the Smart Plug. If the light indicator on Amazon Smart Plug starts to blink Red then, this signifies that there is a connectivity issue. Generally, this issue is minor but at times can cause hassle for the user. Here is how you can fix this issue:

1. At first, remove the Smart Plug from the power source.
2. Now, wait for few seconds (say 30 seconds).
3. Re-plug the Smart Plug back to the power source.
4. Now check whether the red light is blinking or not.
5. If not, then you are good to go.

Power cycling the device itself can fix lots of minor glitches associated with the device. It is one of the best ways to get the job done. So try out this method and wipe out this glitch.

Reset Amazon Smart Plug

If your Smart Plug is indicating Red light, then in such a case resetting the device can fix this problem. Here is How to Fix Amazon Smart Plug Blinking Red Light Issue:

1. Initiate the process by plugging the Smart Plug into an active power source.
2. Now press the button located on the side of the Smart Plug.
3. Hold this button until the light turns red.
4. Wait till the light turns blue.
5. The blue light indicates that the device has been reset.

Now follow these steps to set up the Smart Plug again:

1. Launch the Alexa Application.
2. Navigate to the Devices section and click on the “+” logo.
3. Tap on Continue > Next > Scan Barcode.
4. Now use the camera to scan the barcode.
5. Plug the device into an active wall outlet.
6. Wait for few seconds and let Alexa detect your Smart Plug.
7. Now press the option Next > Skip > Done.

Also Read: How to Connect a Smart Plug to Alexa? 

Final Words

This was all about How to Fix Amazon Smart Plug Blinking Red Issue. Try out these methods and get rid of this technical defect without any external support. But if you are unable to get rid of this issue and need help from professionals, then you can connect with our Alexa experts on the chat or dial Alexa Helpline Number 1-872-888-1589.